| | |
|
| |
| | |
|
|
3M Scotch-Weld DP-810 Acrylic Adhesive, Tan, 50ml
|
|
Regular Price: $53.56
Sale Price: $39.78
Item Number: DP810-1.7OZ
Quantity Discounts - Order a quantity in the range below to receive the followin
| Quantity | Amount |
| 12 to 23 | $38.78 |
| 24 or more | $38.29 |
|
|
3M Scotch-Weld DP-810 Acrylic Adhesive, Tan, 50ml
3M™ Scotch-Weld™ DP810 is a tan, toughened two-part 1:1 ratio acrylic adhesive with less odor than most acrylic adhesives. Has excellent shear and peel strength along with good impact resistance and durability. Quickly bonds most metals, ceramics, wood, and most plastics. 10 minute work-life and handling strength in 20 minutes. Dispensed with 3M Scotch-Weld EPX II Plus Applicator.
Features
- Toughened for impact resistance
- Low odor
- Excellent shear and peel strength
- General industrial, sporting goods, solar energy, wind energy, composites,
electronics, military, metal to metal bonding, transportation, and aerospace
- Bonding, gluing, joining, attaching, assembling, encapsulating, potting, and sealing.
Applications:
- Bonding a golf club head to shaft ( 24 hour cure time recommended before hitting)
Directions for Use:
Important: Use only the specified 3M™ EPX™ Plus II Applicator system.
1) Apply adhesive to clean, dry substrates, which are free of paint, oxide films, oils, dust, mold release agents and all other surface contaminants.
2) Place duo-pak cartridge in EPX applicator. Remove cap. Dispense and discard a small amount of adhesive to assure even ratio and free flow. Clear orifice if necessary. Use only square mixing nozzle by: (a) aligning nozzle notch with cartridge recess, and (b) twisting into place. Dispense and discard a small amount of adhesive through nozzle until the adhesive is mixed.
Note: **DP-810 Adhesive requires 3M EPX Plus II Applicator and a 1:1 mixing nozzle for proper dispensing**
UPC# 00021200313103
|
Regular Price: $129.00
Sale Price: $104.90
| | |
|
|
|