| | |
|
| |
| | |
|
|
3M Scotch-Weld Structural Plastic Adhesive DP8005 Off-White, 490ml
|
|
Regular Price: $555.50
Sale Price: $452.00
Item Number: 62278636303
Quantity Discounts - Order a quantity in the range below to receive the followin
| Quantity | Amount |
| 12 or more | $447.99 |
|
|
3M Scotch-Weld Structural Plastic Adhesive DP-8005, Off White 490ml
3M™ Scotch-Weld™ Structural Plastic Adhesive DP-8005 is a two part acrylic-based adhesive that provide high quality bonding performance on low surface energy plastics, including polypropylene, Polyethylene, and thermoplastic olefins without special surface treatment.
Features:
-Structural assembly of polyolefins
-No pre-treatment of materials
-Good assembly appearance allows for great flexibility in design
-Unlimited assembly possibilities, including assembly of PE and PP
to themselves and other materials such as plastic, metal, wood, etc..
3M ID: 62278636303
UPC : 05112899297
Directions for Use:
Important: Use only the specified 3M™ EPX™ Manual Applicator.
1) Apply adhesive to clean, dry substrates, which are free of paint, oxide films, oils, dust, mold release agents and all other surface contaminants.
2) Place 250ml duo-pak cartridge in EPX Manual 200, 250, 400 applicator. Remove cap. Dispense and discard a small amount of adhesive to assure even ratio and free flow. Clear orifice if necessary. Use only orange 10:1 mixing nozzle by: (a) aligning nozzle notch with cartridge recess, and (b) twisting into place. Dispense and discard a small amount of adhesive through nozzle until the adhesive is mixed.
* Note: DP8005 490ml Adhesive require 3M EPX Manual 490ml Applicator, and EPX 490ml Helical Mixing Nozzle Orange for proper use *
|
Regular Price: $552.00
Sale Price: $469.00
|
Regular Price: $5.99
Sale Price: $4.29
| |
|
|
|