| | |
|
| |
| | |
|
|
3M Scotch-Weld Structural Plastic Adhesive DP 8005, 250ml
|
|
Regular Price: $139.99
Sale Price: $124.99
Item Number: DP8005-250ML
|
3M Scotch-Weld Structural Plastic Adhesive DP-8005, 250ml
3M™ Scotch-Weld™ Structural Plastic Adhesive DP-8005 is a two part acrylic-based adhesive that provide high quality bonding performance on low surface energy plastics, including polypropylene, Polyethylene, and thermoplastic olefins without special surface treatment.
Features:
-Structural assembly of polyolefins
-No pre-treatment of materials
-Good assembly appearance allows for great flexibility in design
-Unlimited assembly possibilities, including assembly of PE and PP
to themselves and other materials such as plastic, metal, wood, etc..
Directions for Use:
Important: Use only the specified 3M™ EPX™ Plus II Applicator system.
1) Apply adhesive to clean, dry substrates, which are free of paint, oxide films, oils, dust, mold release agents and all other surface contaminants.
2) Place 250ml duo-pak cartridge in EPX Pneumatic 200ml applicator. Remove cap. Dispense and discard a small amount of adhesive to assure even ratio and free flow. Clear orifice if necessary. Use only orange 10:1 mixing nozzle by: (a) aligning nozzle notch with cartridge recess, and (b) twisting into place. Dispense and discard a small amount of adhesive through nozzle until the adhesive is mixed.
** Note: DP8005 250ml Adhesive require 3M EPX Pneumatic 200ml Applicator, EPX 10:1 Conversion Kit for Pneumatic 200ml Applicator, and EPX 10:1 200ml Mixing Nozzle for proper use ** |
|
|
|